Double Glazing Lock Repairs
A good quality lock on your windows and doors will stop burglars from accessing your home. Generally, they don't like breaking glass or slipping through open windows.
Some double glazing owners, however, have had issues with their window or door lock after the installation. Luckily, these problems are often fixable without having to purchase new double glazing.
Broken or faulty locks
If your uPVC door or window lock is broken or faulty, then a locksmith can fix it. They can fix hinges, striker plates and locks for your double-glazing. They can also reposition the cylinder in order to fix any misalignment that could cause your handle to function properly.
The mechanism could be seized if the key fits in the lock, but it does not turn or is difficult for you to insert. This could be due to dirt or grime accumulating in the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is crucial to use a dry lubricant, like graphite or teflon instead of oil, which can attract dirt and stick to the interior of the mechanism. After you have lubricated the lock, you should insert the key and attempt to turn it. The lubricant must be absorbed into the mechanism, and the lock should turn smoothly.
A damaged lock can be caused by loose screws in the lock mechanism. They may loosen and fall out or even break off completely, preventing the lock from being able to function properly. These screws can be tightened by using the help of a screwdriver. However, be cautious not to tighten them too much. This could damage the internal components.
A faulty lock is dangerous for you and your family. This is especially relevant if you have young children. They can easily unlock the door without your knowledge, giving them access to your house. If you're worried about this happening, a vetted locksmith can provide rapid and effective service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.
Handles that are broken or faulty
As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is a great option for those concerned with opportunistic thieves looking for ways to gain access to your home. It is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted in addition to the locks that are already in place to ensure that your window is locked in a closed position.
Handle locks are often damaged or fail. They are the first thing a criminal will employ to open your window. The good news is that this is one of the most straightforward parts to fix.
Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette which is designed to resist forced entry. This security upgrade is available as an option for new uPVC windows. As an optional upgrade, older style aluminium or uPVC handles that are no longer in use can be upgraded to a shoot bolt locking system.
It is essential to fix the handle as soon as you can if it's damaged. Faulty handles may prevent the window from closing properly and permit a draft to enter. It could also be a vulnerability that thieves can exploit and put your family's possessions and your personal belongings at risk.
To fix the malfunctioning mechanism, first access the window frame and then remove the damaged handle. The gearbox is then accessed to identify the type of gearbox that is used to open the handle. This will allow a replacement that matches the profile and the internal window frame mechanisms.
Once the mechanism has been replaced the handle can be re-affixed with the original screws - but we would recommend replacing them with larger ones because this will ensure the most secure fit. The final stage is to apply a layer of clear sealant to shield the handle from further rust. Once you've completed this step, your window should be fully functional again at a fraction of the cost of replacing it.
Hinges that are Broken or Faulty
If your windows don't close properly, you could suffer from draughts or the weakening of your home's security and a higher risk of damp or water damage. Windows hinges that break or fail to function properly are a common occurrence and can be easily repaired.
If your uPVC windows don't open or shut it's likely that hinges need to be replaced or repaired. While many window companies require that you purchase a new window unit to fix this simple problem We can replace the hinges that are damaged and save you money.
Window hinges may break from repeated use or they could be weakened through rust over time. If you've broken a window hinge, it is important to take precautions to prevent further damage. This includes not forcing the window to close or open.
Identifying your hinge type will help you identify the right parts to repair it. double glazing repair near me , Mila and Roto are all window hinges. It's best to consult a professional in this case to ensure that you don't make the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.
Faulty hinges can be a major issue for your uPVC windows and doors. They can be an important source of noise and can also allow water to get into your windows.
Verify whether the pin barrels on both sides of the hinge are aligned. If not, tap the headpin with a hammer in order to create an incline in the hinge barrel. This will help keep the pin in position. Ask a second person to hold the door while you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges with ones that are the same size and install the screws with glue. After the glue is drying, fix the hinges by using weights or clamps.
After you have repaired the hinges, you can reinstall the door. You can also reattach the handle. Replace the screws using wood dowels of the same length as the original screw to ensure that they are compatible.
Glass that is damaged or damaged
While uPVC windows do an excellent job of keeping the cold out and heat in, they can become damaged over time. This can include broken or damaged glass, as well as faulty locks. This is an issue that could be extremely costly if left unattended. It also can detract from the aesthetics of your home and could lead to a loss of insulation, so it is essential to fix any damage as quickly as you can.
If your glass is cracked, but not broken it is possible to fix it yourself using the right tools and methods. First, make sure the area around the glass is clear so that any shards don't cause injury to anyone or are an accident-prone area. Then, take any broken pieces and dispose of them appropriately. Apply masking tape across the entire area. This will prevent glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's best to fit the glass pane before glueing it back in place so that you are sure you'll have enough room to complete the task.
Use a clean, dry cloth to wipe clean the glass's surface and the frame before applying the glue. Follow the instructions for application and curing, which can vary from product to product. Depending on the angle of the crack, you may want to hold the glass to hold it in place during curing. This can be done using lightweight clamps designed to hold fragile materials.
After the adhesive has completely set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash as well as the frame. Be careful to avoid flexing the window as it's being installed, as this could weaken the seal and lead to condensation and water infiltration.
Contact a professional glazier such as O'Brien(r) for an exchange if your glass window is completely shattered. It's important to act quickly in the event of broken glass.